144
2.
Tap a process to stop the process from running.
When you stop the process the service or application will
no longer run until you start the process or application
again.
Important!:
Stopping a process might have undesirable consequences on the
application.
Android Development
䊳
From the Home screen, touch ➔
Settings
➔
Applications
➔
Development
.
Important!:
These features are used for development purposes only.
USB Debugging
This feature is used for development purposes only.
Setting the Device to Stay Awake
To share this devices internet with your laptop or computer
through the USB port, you must use a screen saver to keep the
device awake. Without a screen saver, the phone will disconnect
from a Wi-Fi, 2G (Edge), or 3G connection. Use the Stay awake
option to keep the phone awake so you can share the internet.
This feature is used for Android application development.
Note:
The phone will not go into sleep mode while charging when this
feature is activated.
Allowing Mock Locations
This feature is used for development purposes only.
If you are a developer who is testing a GPS applications using
this device, you can tell the device that the phone is at different
GPS locations. In other words, the phone is allowed to “mock”
the coordinates.
USB Settings
This menu selects the method of communication for the USB
port.
Note:
Before initiating a USB connection with the phone you must disable the
Bluetooth feature, and/or USB debugging feature.
1. From the Home screen, touch ➔
Settings
➔
Applications
➔
USB settings
.
T959 Supersonic.book Page 144 Thursday, August 5, 2010 4:13 PM
To Next Page
Loading...
