To Next PageTo Next PageWhy does my Samsung VS15A60 lose suction and vibrate?
If your Samsung Vacuum Cleaner's suction force suddenly decreases and it makes a vibrating sound, check for clogs in the brush, dustbin, or pipe and remove any foreign matter. Also, empty the dustbin if it's full and clean the filter if it's dirty.
What to do if my Samsung VS15A60 Vacuum Cleaner is not charging?
If your Samsung Vacuum Cleaner won't charge, check the charging terminal for any dust or foreign matter and remove it with a cotton swab or soft cloth. Also, verify that the vacuum cleaner is turned on and that the LED of the battery level indicator is lit.
What to do if my Samsung VS15A60 Vacuum Cleaner does not work?
If your Samsung Vacuum Cleaner isn't working, first check the battery level and charge it if necessary. Ensure the vacuum is turned on by pressing the power button. Inspect the pipe, dustbin, and brush for any blockages. Also, verify that the washable micro filter is correctly inserted. If the vacuum hasn't been used for a while, charge the battery. If all else fails, the battery may need replacement.
How to fix Samsung Vacuum Cleaner that cannot be charged?
If your Samsung Vacuum Cleaner isn't charging, check the charging terminal for dust or foreign matter and remove it with a cotton swab or soft cloth. Also, ensure the vacuum cleaner is turned on, and then check if the LED of the battery level indicator is on.
What to do if Samsung Vacuum Cleaner stops during cleaning?
Your Samsung Vacuum Cleaner might stop during cleaning due to several reasons: when it operates with a full dustbin, with a clogged suction part or brush, or when the Extension Crevice Tool is used for extended periods. After addressing the cause, turn the product on again. Note that this may vary depending on the ambient temperature.
Why my Samsung VS15A60 does not work?
If your Samsung Vacuum Cleaner isn't working, start by checking the battery level and charge it if necessary. Ensure the device is powered on. Also, inspect the pipe, dustbin, and brush for any blockages. Make sure the washable micro filter is correctly inserted. If the vacuum hasn't been used recently, give the battery a charge. If the battery is dead, it will need to be replaced.
What to do if my Samsung Vacuum Cleaner releases dust after cleaning?
If small dust particles come out of the brush after cleaning with your Samsung Vacuum Cleaner, operate the vacuum for 10 seconds or more after cleaning to suction up the small dust particles.
Why does my Samsung Vacuum Cleaner smell bad?
To address the odor coming from your Samsung Vacuum Cleaner's air outlet or filter, empty the dustbin and clean the filters frequently. Note that new vacuum cleaners may have a slight odor for the first 3 months after purchase. Accumulated dirt in the dustbin or dust on the filter may also generate an odor.
How to fix spinning brush on Samsung VS15A60?
If the spinning brush inside your Samsung Vacuum Cleaner isn't working, and the spinning brush stuck display is on, turn off the vacuum and check the brush for any foreign matter. Remove any obstructions and restart the vacuum. Also, ensure the vacuum cleaner is turned on, then try turning it off and on again. For the Jet Fit Brush, if the vacuum overheats, allow about 30 minutes for the motor to cool down.
Why Samsung VS15A60 smells bad?
An odor from your Samsung Vacuum Cleaner's air outlet or filter can be due to a few reasons. Empty the dustbin and clean the filters frequently to mitigate odors. New vacuum cleaners may have a slight odor for the first 3 months. Frequent use can cause accumulated dirt in the dustbin or dust on the filter to generate an odor.
General| Brand | Samsung |
|---|---|
| Model | VS15A60 Series |
| Category | Vacuum Cleaner |
| Language | English |
Guide on wall mount installation, including placement and securing methods for optimal use.
Instructions for charging the vacuum using wall or desk chargers, detailing indicator lights and charging status.
Explanation of the power button for starting in MID mode and suction control buttons for adjusting power.
Procedure for detaching pipes and brushes, with advice on pre-cleaning to remove foreign matter.
Steps to remove dust from the dustbin and mesh filter, and clean the dustbin itself.
Guidance on cleaning the washable micro filter monthly, emphasizing thorough drying.
Instructions for cleaning the fine dust filter, including frequency and proper drying methods.
Maintenance tips for specific accessories like Mini Motorized Tool, Extension Crevice Tool, and Jet Fit Brush.
Covers essential safety precautions for using the vacuum cleaner, including supervision, intended use, and avoiding hazards.
Details safety rules for wall mount, vacuum cleaner operation, and installation to prevent injury or damage.
Warnings related to power connections, charger usage, and safe operation practices during use.
Safety guidelines for cleaning the vacuum cleaner and its parts, including detergent usage and precautions.
Important notes and cautions on battery charging, usage, replacement, and safe handling practices.
Advice on brush operation, static electricity, and notes on maintaining performance and care.
Solutions for the vacuum cleaner not working, reduced suction, or vibrating sounds.
Troubleshooting steps for charging issues, a non-working spinning brush, and odors.
Solutions for dust particles after cleaning, temporary stops, and static electricity.
Summary of model, power, battery specifications, charging time, and cleaning time.
