Samsung WA476DSHASU/A1 - Page 10

ALIGNMENT AND ADJUSTMENTS
10
Board Input Test Mode
Denition of Board Input Test Mode:
- BoardInputTestModeistodisplaysaspeciedinputafterakeypress.
How to Enter:
- ToentertheBoardInputTestMode,presstheExtraRinsekeyduringServiceMode.
Board Input Test Mode:
1. ActivatetheServiceModerst.
2. PressthekeytostartBoardInputTest.
3.TurntheJog-Dialsothatthenormalcourseisturnedon,andTheWaterTemperaturewillbe
displayedinCelsius.
4.TurntheJog-DialsothattheHeavydutycycleisturnedon,TheWaterTemperaturewillbe
displayedinFahrenheit.
5.TurntheJog-DialsothatthePermPresscycleisturnedon,Thedoorstatuswillbedisplayed(OP
ifopen,CLifclosed).
6. TurntheJog-DialsothattheRinse+SpinorQuickWashisturnedon,TheDoorLockSwitch
statuswillbedisplayed(ULifunlocked,LOiflocked).
Toavoidriskofelectricalshock,personalinjuryordeath;disconnectpowertowasher
beforeservicing,unlesstestingrequirespower.
WARNING
[Technical information]WA484DSHA_03051B_EN.indd 10 2012-06-25 �� 11:12:01