Samsung WA476DSHASU/A1 - Critical Installation Warnings

ALIGNMENT AND ADJUSTMENTS
5
Quick Test Mode:
1. AllLED’slightupanditsendsoutBeepSoundwhenit
entersintotheQuickTestMode.(Including7-Segment)
2. DisplayssoftwareversionforasecandClearEEprom.
3. Whentheversionisdisplayed,turntheJog-Dialsothat
theversiondisappears.Pressthefollowingkeystotestthe
variouscomponents.
-TempKey:WaterValveTest
-Signal:DoorLock/UnlockTest
-SoilKey:WaterHeaterTest
-Spin:Drain/circulationpumptest
EEPROM Clear Check
Denition of EEPROM Clear Mode:
- EEPROMinitialization.
- Allcourse/optionsettingsaretoberesettodefault
valuesafterEEPROMinitialization.
- WhenServicearisesanditneedsPCBreplacement,
EEPROMshouldbereset.
How to Enter:
- Theunitneedstobeon.
- PressDelayStartKey,andPowerKeyatthesame
time.
Toavoidriskofelectricalshock,personalinjuryordeath;disconnectpowertowasher
beforeservicing,unlesstestingrequirespower.
WARNING
[Technical information]WA484DSHA_03051B_EN.indd 5 2012-06-25 �� 11:12:00