Samsung WA476DSHASU/A1 - Installation Cautions and Critical Usage Warnings

ALIGNMENT AND ADJUSTMENTS
6
Continuous Run Mode
Denition of Continuous Run Mode:
- WillcontinuouslyrepeatthecurrentcycleuntiltheContinuousRunModeiscancelled.
How to Enter:
- PressDelayStart+SoilLevelKeytogetherfor7sec.
Continuous Run Mode:
1. Press
DelayStart+SoilLevel Keyfor7secduringPowerOnState(NormalUserMode).
2.
OnceinContinuousRunMode,Thesevensegmentswillnolongerdisplay“0000”andwillalternate
betweendisplayingthenumberofcyclesofthecompletedcourseandtheremainingtimeofthecourse.
3. TheContinuousRunModewillrepeatthepreviouscycleuntilcontinuousrunmodeiscancelled.
4.
DuringContinuousRunMode,pressDelayStart+SoilLevelKeyfor7sectoreturntonormal
usermode.Thesevensegmentswillnolongerdisplaythenumberofcyclesandwilldisplaythe
maintenancetimeonly.
5. IfyouexitServiceModeafterenteringitfromContinuousMode,thewashingmachinereturns
toContinuousMode.
6. IfpowerislostinContinuousRunMode(thatis,whenthepowerplugisdisconnectedorthe
Powerkeyispressedturningthewashingmachineo),themodeisreleasedwhenthewashing
machineisturnedonagain.
Service Mode
Denition of Service Mode:
- ServiceModeenablesservicetechnicianstoverifytheoperationofthewashingmachineand
dotroubleshooting.
- ServiceModecanbeenteredduringallwashingcyclewithoutinterruptingthecycleexcept
someoftestmodes.
- VarioustestscanbedonewithServiceMode.So,troubleshootingcanbedonebasedonthe
resultingdiagnosticcodes.
How to Enter:
- ToentertheServiceMode,presstheSignalandExtraRinseKeysfor3secondsoruntiltheunit
sendsoutbeepingsounds.
Toavoidriskofelectricalshock,personalinjuryordeath;disconnectpowertowasher
beforeservicing,unlesstestingrequirespower.
WARNING
[Technical information]WA484DSHA_03051B_EN.indd 6 2012-06-25 �� 11:12:00