Samsung WA52J8060A User Manual (English)

Questions and Answers:

J
Jessica MurrayAug 12, 2025
Why Samsung WA52J8060A won't start?
- A
  Andrew FisherAug 12, 2025
  Several factors might prevent your Samsung washer from starting. Ensure the door is fully closed and the water taps are open. Press the Start/Pause button to initiate the cycle. Verify that the Child Lock feature is disabled. If the door was opened during a spin cycle, close it and press Start/Pause to resume. The machine may be in Standby or a soaking cycle, so allow it time to proceed. Also, examine the fuse or circuit breaker. Before filling, the washer will make clicking noises to check the door lock and perform a quick drain.
W
wilkersoncarolAug 21, 2025
What to do if Samsung Washer does not turn on?
- C
  Chad SalazarAug 21, 2025
  If your Samsung washer isn't turning on, ensure it's receiving the correct rated power. Check that the power cord is fully plugged into the outlet. Also, inspect the fuse or reset the circuit breaker.
C
Christie MichaelAug 31, 2025
What to do if Samsung WA52J8060A water is not supplied?
- S
  Sean SchroederAug 31, 2025
  If your Samsung washer isn't getting water, first, press Start/Pause after selecting the water supply. Make sure the water taps are fully open and that the water supply hoses are not kinked or bent. If the filter net at the water supply hose connector is clogged, clean it with a toothbrush. If the water supply is cut off, close the tap and power off the machine. If the water pressure is low, the washing process may take longer to start. If the water level is not as high as necessary, use the level selector to adjust it. Try opening and closing the door, then press Start/Pause.