Why is my laundry still wet after a Samsung Washer cycle?
If your laundry is still wet after a Samsung washer cycle, use the High or Extra High spin speed. Use high-efficiency (HE) detergent to reduce oversudsing. The load may also be too small.
What to do if Samsung Washer does not start?
If your Samsung washer isn't starting, consider the following: * Ensure the door is completely closed. * Confirm that the water taps are open. * Press or tap the START/PAUSE button to initiate the washing machine. * Verify that Child Lock is not activated. * Note that before filling, the washing machine makes clicking noises to check the door lock, followed by a quick drain. * If the door was opened during the spinning cycle, close it and press START/PAUSE to resume. * The machine may be in Standby or a soaking cycle; please wait. * Check the fuse or reset the circuit breaker.
What to do if Samsung WA52M8650AW does not drain and/or spin?
If your Samsung washer is not draining and/or spinning, try the following: * Check the fuse or reset the circuit breaker. * Ensure the electrical voltage is normal. * Make sure the washing machine is properly plugged in. * Ensure the drain hose is pointed downward (for natural drain models only). * Verify that the drain hose is not clogged or kinked; straighten it if necessary. If there is a drain restriction, call for service. * Close the door, and then press or tap START/PAUSE. For your safety, the washing machine will not spin unless the door is closed.
How to fix Samsung Washer not turning on?
If your Samsung washer isn't turning on: * Ensure your home electrical system provides the correct electrical power. * Make sure the power cord is completely plugged in. * Check the fuse or reset the circuit breaker.
What to do if Samsung WA52M8650AW Washer door (lid) locked or will not open?
If the door (lid) on your Samsung washer is locked or won't open: * Press or tap START/PAUSE to stop the washing machine if it's operating. * Allow a few moments for the door lock mechanism to disengage.
How to reduce vibration and noise in my Samsung WA52M8650AW Washer?
To reduce vibration and noise in your Samsung washer, ensure it's set on a level floor and isn't contacting any other object. Make sure the laundry load is balanced and spread evenly. Ensure the space around the washer is free of objects. Humming during operation is normal. Remove any objects like coins from the washing machine after washing.
Why does water drain out immediately from my Samsung WA52M8650AW?
If water drains out immediately from your Samsung washer: * Make sure the drain hose is not clogged and is hung over the drain hose hook. Fill the spin basket halfway with water, and try spinning again. * Lift the end of the drain hose to prevent water from draining. Fill the spin basket halfway with water, and then run the Spin cycle after releasing the drain hose. * Ensure the drain hose is installed correctly.
What to do if water is not supplied to my Samsung Washer?
If water is not being supplied to your Samsung Washer, first, ensure you press the START/PAUSE button after selecting your cycle and options, and that the water taps are fully open. Straighten any kinks in the water supply hoses. Open and close the door, then press START/PAUSE. If the water pressure is low, the start of the wash may be delayed. Adjust the water level using the level selector if it's lower than expected. If the water supply is cut off, close the tap and power off.
Why is my Samsung Washer vibrating excessively or making noise?
Excessive vibration or noise in your Samsung washer can be attributed to several factors: * Ensure the washing machine is placed on a level floor. * Verify that the washing machine isn't in contact with any other object. * Make sure the laundry load is balanced and spread evenly inside the washing machine. Spread out the laundry evenly and start again. * Confirm that the space around the washing machine is free of objects. * Keep in mind that humming is normal during operation. * Objects like coins can cause noise; remove them after washing.
What to do if my Samsung WA52M8650AW Washer does not drain or spin?
If your Samsung washer isn't draining or spinning, check the fuse or reset the circuit breaker. Ensure the electrical voltage is normal and that the machine is plugged in. Make sure the drain hose is pointed downward, is not clogged or kinked, and is straightened. Close the door, and press Start/Pause.
General| Style | top load |
|---|---|
| Color | white |
| Washer Capacity | 5.2 cubic feet |
| Max Spin Speed | 800 revolutions per minute |
| Spin Speeds | 4 |
| Number of Cycles | 12 |
| Cycle Selections | normal, bedding, quick wash, water proof, brilliant whites, heavy duty, active wear, rinse + spin, deep clean, permanent press, delicates and hand wash, spin only, super speed |
| Options | my cycle, sound on/ off, pre-soak, extra rinse, smart care, eco plus, self clean, child lock, delay end |
| Temperature Settings | 5 |
| Temperature Selections | hot, warm, cold, eco warm, cool |
| Soil Levels | heavy, normal, light |
| Internal Heater | no |
| Control Panel | dial, button |
| Delay Start / End | yes |
| Child Lock | yes |
| Cycle Signal | yes |
| Interior Light | no |
| Steam | no |
| Dispenser | single load |
| Smart Home | no |
| Annual Energy Consumption | 125 kilowatt hours |
| Voltage | 120 volts |
| Current | 15 amperes |
Weight and Dimensions| Depth | 29 5/16 inches |
|---|---|
| Height | 42 2/5 inches |
| Width | 27 inches |
| Net Weight | 136.7 pounds |
To Next Page