Why is detergent remaining in the automatic dispenser of my Samsung Washer after a cycle?
If detergent remains in the automatic dispenser of your Samsung washer after a cycle: * Ensure the washing machine is running with sufficient water pressure. * Make sure the detergent drawer is properly inserted. * Remove and clean the detergent drawer, and then try again.
Why are my clothes still wet after a Samsung WA52M8650AW cycle?
If your clothes are still wet after a Samsung washer cycle: * Use the High or Extra High spin speed cycle (if available on your model). * Use high-efficiency (HE) detergent to reduce oversudsing. * Small loads (one or two items) may become unbalanced and not spin completely.
Why does my Samsung WA52M8650AW stop mid-cycle?
If your Samsung washer stops during a cycle, consider these possibilities: * Ensure the power cord is plugged into a live electrical outlet. * Check the fuse or reset the circuit breaker. * Close the door and press START/PAUSE to start the washing machine. It won't spin unless the door is closed for safety. * The machine makes clicking noises to check the door lock, followed by a quick drain before filling. * There may be a pause or soak period in the cycle; wait briefly. * Ensure the inlet hose filters at the taps are not clogged; clean them periodically. * Low voltage in your home's electrical system can cause temporary stops; it will resolve when the voltage returns to normal.
Why does my Samsung WA52M8650AW Washer leak water?
Your Samsung Washer might be leaking water due to several reasons: * Ensure all hose connections are tight. * Check the water supply hoses' rubber washers are correctly positioned and screwed tightly. * Verify the drain hose is correctly inserted and secured to the drain system. * Avoid overloading the washer. * Use high-efficiency (HE) detergent to prevent oversudsing. * Make sure the water supply hose isn't kinked. * If the water supply pressure is too strong, close the water tap a little. * Check if water is leaking from the water tap; if so, repair it.
Why is my Samsung Washer vibrating excessively or making noise?
Excessive vibration or noise in your Samsung washer can be attributed to several factors: * Ensure the washing machine is placed on a level floor. * Verify that the washing machine isn't in contact with any other object. * Make sure the laundry load is balanced and spread evenly inside the washing machine. Spread out the laundry evenly and start again. * Confirm that the space around the washing machine is free of objects. * Keep in mind that humming is normal during operation. * Objects like coins can cause noise; remove them after washing.
What to do if the door of my Samsung WA52M8650AW is locked or will not open?
If the door of your Samsung washer is locked or won't open, press Start/Pause to stop the washing machine. It may take a few moments for the door lock mechanism to disengage.
What to do if my Samsung WA52M8650AW Washer does not drain or spin?
If your Samsung washer isn't draining or spinning, check the fuse or reset the circuit breaker. Ensure the electrical voltage is normal and that the machine is plugged in. Make sure the drain hose is pointed downward, is not clogged or kinked, and is straightened. Close the door, and press Start/Pause.
Why is my Samsung WA52M8650AW Washer leaking water and how to fix it?
If your Samsung washer is leaking, ensure all hose connections are tight and that the water supply hose's rubber packing is correctly positioned. Verify the drain hose is correctly inserted and secured. Avoid overloading the machine and use high-efficiency (HE) detergent to prevent excessive suds. Ensure the water supply hose isn't kinked and that water isn't leaking from the tap. If the water supply is too strong, close the water tap a little.
How to fix a Samsung WA52M8650AW Washer that does not turn on?
If your Samsung washer isn't turning on, ensure you're using the correct rated power for the appliance. Make sure the power cord is completely plugged into the outlet. Also, check the fuse or reset the circuit breaker.
How to fix Samsung WA52M8650AW that does not turn on?
If your Samsung Washer does not turn on, ensure your home electrical system meets the washer's power requirements. Check that the power cord is fully plugged in and inspect the fuse or reset the circuit breaker.
General| Style | top load |
|---|---|
| Color | white |
| Washer Capacity | 5.2 cubic feet |
| Max Spin Speed | 800 revolutions per minute |
| Spin Speeds | 4 |
| Number of Cycles | 12 |
| Cycle Selections | normal, bedding, quick wash, water proof, brilliant whites, heavy duty, active wear, rinse + spin, deep clean, permanent press, delicates and hand wash, spin only, super speed |
| Options | my cycle, sound on/ off, pre-soak, extra rinse, smart care, eco plus, self clean, child lock, delay end |
| Temperature Settings | 5 |
| Temperature Selections | hot, warm, cold, eco warm, cool |
| Soil Levels | heavy, normal, light |
| Internal Heater | no |
| Control Panel | dial, button |
| Delay Start / End | yes |
| Child Lock | yes |
| Cycle Signal | yes |
| Interior Light | no |
| Steam | no |
| Dispenser | single load |
| Smart Home | no |
| Annual Energy Consumption | 125 kilowatt hours |
| Voltage | 120 volts |
| Current | 15 amperes |
Weight and Dimensions| Depth | 29 5/16 inches |
|---|---|
| Height | 42 2/5 inches |
| Width | 27 inches |
| Net Weight | 136.7 pounds |
To Next Page