English - 24
Operations
Control panel
1 Program Selector Select the tumble pattern and spin speed for the cycle.
2 Display
Provides instructions and diagnostics while keeping you updated on
the program status and time information.
3 Temp.
Press to select a water temperature: Cold (O), 30 ˚C, 40 ˚C, 60 ˚C
and 90 ˚C.
4 Rinse
Press to add additional rinse cycles. The maximum number of rinse
cycles is five.
5 Spin Press to select a speed for the spin cycle.
6 Dry Level
Press to select a dry level:
Normal Dry > Extra Dry > Time Dry (30 min. > 1:00 h > 1:30 h >
2:00 h > 2:30 h) > Disable or O > Normal Dry
• Normal Dry: Use to dry laundry such as cotton, underwear and
linen.
• Extra Dry: Useful to dry heavy garments such as jeans and
towels.
• Time Dry: Use to dry the laundry for a specified period of time
according to the material, load and moisture.
7 Stop & Add
This allows you to add/remove laundry even after the wash has
started, as long as the corresponding indicator is lit.
8 Delay End The displayed time refers to the end time of a selected course.
9 Auto Detergent
The washing machine dispenses detergent automatically according to
the load.
10 Auto Softener
The washing machine dispenses fabric softener automatically
according to the load.
11 START/PAUSE Start or stop operation.
12 POWER
Press to turn on/o the washing machine. If the washing machine
leaves inactive for more than 10 minutes, it will turn o automatically.
Untitled-4 24 2016-04-07 3:24:35
To Next Page
Loading...
