Samsung WF455ARGSGR/A2 - Page 16

14 _ Removal and Reassembly
Part Figure Description
Separating the Main
PCB
1. Removethe2screwsholdingGUIDE-PCB(M)at
BRACKET-SPRING(R).
2. Separate2Hooks.
3. OpenCOVER-PCB(M).
4. DisconnectAllConnectorsonmainPBA.
5. LiftupMainPBA,ChangeSVCPart.
AfterSVC,CertainlychecktheallHookson
COVER-PCB(M)
 OtherwiseCOVER-PCB(M)willbedisassembled
duringwashingmachinerunning.