Samsung WF45K6500A series - Page 34

Operations
Operations
English34
04 Spin
Press to change the spinning speed for the current cycle.
• Extra High: Extends the spinning process to effectively remove
moisture from the load. (only for WF45K6500A* model)
NOTE
Extra High uses a stronger spinning process to remove
moisture, so it is not suitable for wrinkle-free or no-iron fabrics,
or overloads.
• High: Underwear, t-shirts, jeans and sturdy cottons.
• Medium: Jeans, wrinkle-free or wash-and-wear items and
synthetics.
• Low: Delicate items that requires a lower spinning speed.
• No Spin: The drum does not spin after the nal drain process.
• Rinse Hold (No lamp turns on): The nal rinse process is
suspended so that the laundry remains in the water. To unload
the laundry, run a drain or spin process.
NOTE
Spin Only: This cycle runs a spin cycle only. Press and hold Spin
for 3 seconds. With the cycle time on the display, press Spin
repeatedly until a desired spinning speed is selected. Then, press
Start/Pause to start the cycle.
This cycle is available only when no specic cycle is selected
05 Soil Level
Press the button to select the soil level/washing time.
• Heavy: For heavily soiled loads.
•  (only for WF45K6500A* model)
• Normal: For moderately soiled loads. This setting is best for
most loads.
•  (only for WF45K6500A* model)
• Light: For lightly soiled loads.
06 Options Press the buttons to select different cycle options.
07 Start/
Pause
Press to start or stop operation.
08 Power Press to turn on/off the washer.
WF45K6500AV_DC68-03665A-01_EN.indd 34 2016/4/1 13:37:12