Installation
English 27
Wall standpipe drain system
The drain hose must be placed into a wall
standpipe drain system. To keep the end of
the drain hose bent, use the supplied hose
guide (A). Secure the guide to the wall
using a hook to ensure stable drainage.
STEP 6 Remove the lm inside the door
Remove the small circle lm (B) above the
door latch before use.
STEP 7 Power on
Plug the power cord into an AC 120 V / 60 Hz / 15 AMP approved electrical outlet
protected by a fuse or circuit breaker. Then, press POWER to turn on the washer.
WF5500M_DC68-03876A-02_EN.indd 27 2019-02-12 5:55:17
To Next Page
Loading...
