Samsung WF45R6100AC/US - Simple Steps to Start; To Change the Cycle During Operation

Operations
English34
Operations
Simple steps to start
1
2
3
5
4
1. Press Power to turn on the washer.
2. Turn the Cycle Selector to select a cycle.
3. Change the cycle settings (Temp., Rinse, Spin, and Soil) as necessary.
4. Select desired options as necessary.
5. Press and hold Start/Pause (Hold to Start).
To change the cycle during operation
1. Press Start/Pause (Hold to Start) to stop operation.
2. Select a different cycle.
3. Press and hold Start/Pause (Hold to Start) again to start the new cycle.
WARNING
Do not place anything on top of your washer while it is running.
Untitled-2 34 3/30/2020 12:25:51 PM