Operations
English34
Operations
Simple steps to start
1. Press Power to turn on the washer.
2. Turn the Cycle Selector to select a cycle.
3. Change the cycle settings ( Temp. , Rinse , Spin , and Soil ) as necessary.
4. Select desired options as necessary.
5. Press and hold Start/Pause (Hold to Start) .
To change the cycle during operation
1. Press Start/Pause (Hold to Start) to stop operation.
2. Select a different cycle.
3. Press and hold Start/Pause (Hold to Start) again to start the new cycle.
WARNING
Do not place anything on top of your washer while it is running.
Untitled-4 34Untitled-4 34 4/2/2020 2:28:25 PM4/2/2020 2:28:25 PM
To Next Page
Loading...
