English 37
Operations
Simple steps to start
1. Press Power to turn on the washer.
2. Turn the Cycle Selector to select a cycle.
3. Change the cycle settings ( Temp. , Rinse , Spin , and Soil ) as necessary.
4. Select desired options as necessary.
5. Press and hold Start/Pause (Hold to Start) .
To change the cycle during operation
1. Press Start/Pause (Hold to Start) to stop operation.
2. Select a different cycle.
3. Press and hold Start/Pause (Hold to Start) again to start the new cycle.
WARNING
Do not place anything on top of your washer while it is running.
Cycle overview
NOTE
The washer detects the weight of the items and automatically adjusts the optimal water
level, washing time, rinse counts, and spin counts. (This may not be applicable on some
cycles.)
Standard Cycles
Cycle Description
PERM PRESS
• For wash-and-wear, synthetic fabrics, and lightly to normally
soiled items.
QUICK WASH
• For lightly soiled items that you want to nish washing
quickly.
• For best performance, recommended load is 4 lb or lower.
Untitled-1 37Untitled-1 37 4/2/2020 12:11:12 PM4/2/2020 12:11:12 PM
To Next Page
Loading...
