Samsung WF501ANW Trouble Shooting Guide - Diagnostic Code Check Mode

ALIGNMENT AND ADJUSTMENTS
11
Diagnostic Code Check Mode
Denition of Diagnostic Code Check Mode:
- DiagnosticCodeCheckModeistobringupthestoreddiagnosticcodes(referecodesforservice
technicians).
How to Enter:
- ToentertheDiagnosticCodeCheckModewithcode“d”ashing,presstheSpinkeyduring
ServiceMode.
Board Input Test Mode:
1.ActivatetheServiceModerst.
2. Pressthe“Spinkey”keytostartErrorCodeCheckModewithCode“d”ashing.
3. Tocyclethroughtheerrorcodes,turntheRotaryCycleSelectorinonedirection(either
ClockwiseorCounterclockwise).
4. Now,whenturningtheRotarySelectorKeyinthesamedirection,itshowserrorcodesfromthe
latest.
5. Whenturningitintheoppositedirection,itshowstheerrorcodesinthereverseorder.
Toavoidriskofelectricalshock,personalinjuryordeath;disconnectpowertowasher
beforeservicing,unlesstestingrequirespower.
WARNING
Service Mode
Spin
Diagnostic Code
(Technical information)WF501ANWX-03011B_EN.indd 11 2011-06-24 �� 6:20:24