Samsung WF501ANW Trouble Shooting Guide - Test Modes

ALIGNMENT AND ADJUSTMENTS
4
TEST MODE
Test Mode:
EachTestModefortheGRACEisasfollowsin
thecomingpages.Thetestmodesindicated
bytheredarrowsaremodesunabletogetan
accessoncethewashingcyclehasstarteddue
tosafetyresons.
Quick Test Mode
Denition of Quick Test Mode:
- CheckoperationofallLED’s(VerifyfaultyLED).
- Checkmodelandsoftwareversion.
- Checkdierentoperatingmodes(e.g.watervalve,motor,door,drainpump,etc.).
How to Enter:
- Plugintheunit.
- PressSoilKey,SpinKeyandPowerKeyatthesameTime.
Toavoidriskofelectricalshock,personalinjuryordeath;disconnectpowertowasher
beforeservicing,unlesstestingrequirespower.
WARNING
Special Test Mode
Po wer Off State
Quick Test Mode
EEPROM Clear
Mode
Continuous Cy cle
Mode
Service Mode
Demo Mode
Quick Spin Test Mode
Cy cle Count Check Mode
S/W Version Check Mode
Fast Time Down Test Mode
Board Input Test Mode
Diagnostic Code
CheckMode
Po wer On State
(Normal User Mode)
(Technical information)WF501ANWX-03011B_EN.indd 4 2011-06-24 �� 6:20:24