English - 47
MAINTENANCE
Auto Dispense unit
The Auto Dispense unit must be cleaned regularly to ensure proper operation at all times.
1. Remove the Auto Dispense unit from the washing machine.
2. Wipe out the recess of the Auto Dispense unit using a dry
cloth.
3. Remove two knobs of the Auto Dispense unit as well as the
two caps at the bottom, and run water through the Auto
Dispense unit to clean the inner area.
Do not shake the Auto Dispense unit as you may be
spattered with water from the vent of the Auto Dispense unit.
4. Reinsert knobs and caps in the original position.
5. Reinsert the Auto Dispense unit in the original position.
Untitled-1 47 2015-01-26 11:47:17
To Next Page
Loading...
