How to stop my Samsung WW8*J3 from excessive vibrations or noise?
If your Samsung Washer is vibrating excessively or making noise, make sure it's on a level, solid, non-slippery floor and that the shipping bolts have been removed. Ensure the washer isn't touching anything else and that the laundry load is balanced. Also, be aware that overalls, metal-decorated clothes, or metal objects like coins can cause noise.
Why is no water supplied to my Samsung Washer?
If your Samsung Washer isn't getting enough water, fully open the water tap and make sure the door is properly closed. Check that the water supply hose isn't frozen, kinked, or clogged, and ensure there's sufficient water pressure.
Why is the spinning not working on my Samsung Washer?
If spinning does not work on your Samsung Washer, make sure laundry is spread out evenly and that the washing machine is on a flat, stable surface. Try redistributing the load.
What to do if water is not draining from my Samsung WW8*J3?
If water is not draining from your Samsung Washer, make sure the drain hose isn't frozen or clogged and is correctly positioned. Clean the debris filter and ensure the drain hose is straightened to the drain system.
What to do if the door of my Samsung Washer does not open?
If the door of your Samsung Washer won't open, press Start/Pause to stop the machine. Allow a few moments for the door lock mechanism to disengage. Ensure all water is drained from the drum and the door lock light is off. The door may remain locked if water is still inside.
Why is my Samsung WW8*J3 leaking water?
If your Samsung Washer leaks water, ensure the door is properly closed and all hose connections are tight. Make sure the drain hose end is correctly inserted and secured. Avoid overloading the washer and use high-efficiency (HE) detergent to prevent excessive suds.
What to do if my Samsung WW8*J3 Washer does not drain and/or spin?
If your Samsung Washer won't drain or spin, ensure the drain hose is straight, not frozen or clogged, and properly connected to an unclogged drain system. Also, check the debris filter for clogs. Close the door and press Start/Pause. Insufficient power supply can also temporarily prevent draining or spinning.
To Next Page
General