English - 18
Before you start
lnitial settings
Run Calibration mode (recommended)
Samsung washing machine detects the laundry weight automatically. For more accurate weight detection,
please run Calibration Mode after the installation. Calibration mode is done by following the steps below.
1. Remove laundry or any contents in the machine and turn off the machine.
2. Press the Power button and release it, and then press the Temp button and Delay End button
simultaneously. Then the machine turns on.
3. Press the Start/Pause button to activate “Calibration Mode”.
4. The drum rotates clockwise and counterclockwise approximately for 3 minutes.
5. When “Calibration Mode” is finished, “END(En)” appears on the display, and the machine automatically
turns off. The washing machine is now ready for use.
WW85H7410EW-03403G-01_EN(XSA).indd 18 2014/4/10 16:22:13
To Next Page
Loading...
