1. Press Power to turn on the washing machine.
2. Turn the Cycle Selector to select a course.
3. Change the cycle settings (Temp.,Rinse and Spin) as necessary.
4. To add an option, press Options. Use the button again to choose a preferred item.
5. The machine provides three easy to access buttons for Bubble Soak, Quick Wash 15’/30’,
and Delay End for your convenience. If you want to use one of these options, press the
corresponding button.
6. Press Start/Pause.
To change the cycle during operation
1. Press Start/Pause to stop operation.
2. Select a different cycle.
3. Press Start/Pause again to start the new cycle.
WW90J6610CW_DC68-03505D-03_EN.indd 31 2015/9/15 16:32:24
To Next Page
Loading...