Samsung XA100T - Main Menu

57
9.3 Main Menu
Menu
Description
System
Reconnect
This is used to reconnecting the NovaLCT to
the synchronous system.
Settings
Screen
Configuration
(Advanced
user)
Shortcut button:
This is used for configuration of the LED
screens.
Brightness
Shortcut button:
This is used for adjusting the LED display
brightness. There are two ways for brightness
adjustment, automatic brightness and manual
brightness.
Multi-function
Card
Shortcut button:
This is used to open the page for
Multi-function card configuration.
Multiple-screen
Management
This is used to open the page for combination
display configuration. It makes the
management of brightness control and
monitoring of multiple LED displays easier
when these LED displays are combined
together.
Hardware
Information
This is used to check the information about
the current LED display control system.
Prestore Screen
Enter the restore screen, booting screen and
no signal (including the disconnected network
cable and no DVI signal) screen settings can
be conducted.
Advanced Color
Configuration
(Advanced
user)
l Factory setting (current gain, RGB
brightness).
l Configuration color space (original color
space, target color space).
l Color temperature table.
Adjust Screen
Effect
(Advanced
user)
Enable/Disable 18-bit mode and ClearView
mode.
Cloud
Monitoring
Shortcut button:
Register the display screen to NovaiCare.