75
9.8 Check Hardware Information
Select Settings > Hardware Information to enter the Hardware Information page.
The Hardware Information page
l Current Time of Hardware
This is the date and time of the current synchronous system. Click Read button to update
the hardware time shown in the Time panel. Click Set button to set the time of the current
synchronous system as that of the computer.
Note:
The date information has been set for the synchronous system when
produced. Only time (hour, minute and second) is set here for the
synchronous system.
l Current Operation Communication Port
If more than one synchronous system is connected to the computer, set the
communication port through which the synchronous system to be configured.
l SN Number of Sending Card
Listed are the SNs of all sending cards of the current communication port. To update the
listed SNs, click Reread.
l Hardware Program Version Information
Displays the program version information of the sending card MCU, sending card FPGA,
and receiving card FPGA.
To Next Page
Loading...
