Chapter 4. Settings
45
Setting Music
■ DNSe : You can select a suitable sound for each music genre. Select either <3D-User>
<3D-Studio> <3D-Stage> <3D-Club> <Normal> <Rock> <House> <Jazz> <Dance> <Ballad>
<R&B> <Classical> or <User EQ>.
■ 3D User Set : Sets 3D sound effect and bass enhancement.
3D can be set between 00~05 levels, and Bass Enhance between 00~03 levels.
To use 3D User Set, select <3D User> from <DNSe>.
■ User EQ Set : Directly select a sound effect (EQ). To use User EQ, select <User EQ> from
<DNSe>.
■ Play Mode : Select playback mode such as repeat settings.
Select from <Normal> <Repeat All> <Repeat One> <Shuffle All> and <Intro>.
■ Play Speed : Adjust the playback speed of music/voice recording. Select either <x0.7>
<x0.8> <x0.9> <x1.0>(Normal speed) <x1.1> <x1.2> or <x1.3>. (The higher the number is,
the faster the playback speed is.)
■ Skip Interval :Set the playback interval when you press the [ lœœ ] or [√√l] button during
playback. Select either <1 Track> <03 Sec> <05 Sec> <07 Sec> <10 Sec> <30 Sec> or
<01 Min>.
■ Search Speed : Set the search speed when you press and hold the [ lœœ ] or [√√l] button
during playback. Select either <01 Sec> <03 Sec> <05 Sec> <10 Sec> <15 Sec> <20 Sec>
<30 Sec> or <01 Min>.
■ Intro Time : When you select the Intro function from <Play Mode>, the beginning of all files
will be played back for the seconds you set. Select either <10 Sec> <20 Sec> <30 Sec> or
<60 Sec>.
■ For a VBR file, the Skip Interval and Serach Speed may not be exact.
■
What is DNSe?
DNSe is a sound effect function for MP3 players developed by Samsung and adds a 3D surround sound effect to
the music.
NOTE
To Next Page
Loading...
