Samwon Tech TEMI 300 - Page 16

MENU KEY  MAIN  PROGRAM  SET KEY
EDIT SEG set
MAIN MENU  PROGRAM  EDIT SEG  SET KEY
Set the temperature, humidity, time, TS1, TS2 and TS3 for each
segment
1 : TS1(Time Signal1)
2 : TS2(Time Signal2)
3 : TS3(Time Signal3)
EDIT PT set
MAIN MENU  PROGRAM  EDIT PTN  SET KEY
Set the segment of the top/end, repeat (number of time) and jump
pattern number(wished link pattern number)
4.3.2 PROGRAM
EDIT TIME SG set
MAIN MENU  PROGRAM  TIME SG  SET KEY
NO 0, 1 : These are only for ON or OFF function
NO 2∼9 : These are only for time for ON/OFF
In the view, ON/OFF is selected for Time Signal
For define output by these setting, go and setting on MAIN MENU→
PROGRAM→ EDIT SEG  SET KEY