Need help?Do you have a question about the Samwon Tech TEMI1000 Series and is the answer not in the manual?
General| Brand | Samwon Tech |
|---|---|
| Model | TEMI1000 Series |
| Category | Controller |
| Language | English |
Essential guidelines for safe handling and understanding of the operation manual.
Warnings regarding product usage, modification, and potential hazards.
Explains the meaning of various safety symbols used in the manual and on the product.
Outlines the manufacturer's responsibilities and the product's warranty terms.
Illustrates the sequence of screens displayed when the controller is powered on.
Explains the function of various buttons used for setting values and navigating the interface.
Details the method for inputting numerical data and setting parameters using the touch screen.
Describes the layout and functions accessible from the main screen of the controller.
Explains the setup and display for the controller's stationary operation mode.
Details how to configure and operate the controller using programmed patterns.
Covers the process of automatic PID tuning for optimal control performance.
Allows selection of operation mode (pattern or stationary) and recovery settings.
Explains the fuzzy logic function for improved control during rapid value changes.
Describes how to set a fixed rate for changing the set value over time.
Configuration of current time and setting future operation times for the controller.
Visualizes temperature and humidity patterns over time with selectable view durations.
Displays recorded data and allows navigation through saved graph history.
Configures the transfer of patterns and parameters to an SD card.
Defines temperature, humidity, and time for each segment of a program pattern.
Configures the frequency and conditions for repeating program patterns.
Allows copying, deleting, or initializing program patterns and segments.
Sets ON/OFF states and timing for external time signals used in program operation.
Defines temperature/humidity ranges and time for standby operation during program execution.
Assigns custom names to program patterns for easier identification.
Adjusts display parameters like background color, brightness, and buzzer sound.
Displays a log of Digital Input (DI) errors with date, time, and type.
Reports errors related to the disconnection of the control part.
Reports errors related to the disconnection of the I/O board.
Explains the mapping of engineering units to physical ranges and center points.
To Next Page
