Samwon Tech TEMI1000 Series - Communication Error; Control Part Communication Error; I;O Board Communication Error

References
▶ItisascreenincaseofDIerrorcreation.
▶Thesettingforletterandphotoscreensettingcanbesetin[11.DIfunctionandoperationsetting]in[Installationmanual].
▶ItisconvertedtotheoperationscreenafterescapingfromtheDIerrorscreenwhenistouchedby.
▶ ThesameDIerrorcreationisneglectedfor1minutewhenthescreenischangedbypressingbuttonafterDIcreation.(Here,theneglectingmeanstheDIerrorscreen.)
 Ex)ItneglectsevenDI1iscreatedbyescapingwith“Return”inthestatofDI1creationandtheDIerrorscreenisdisplayedwhenDI1hasbeencreatedevenafter1minute.
▶buttonistoblockthealarmingsoundwhenDIerroriscreated.
 EX)Explanationdependingonlampstate
 -DIerrornocreation(“OFF”state)
 -DIerrorcreation(“ON”state)
 -ReleaseafterDIerrorcreation(“ON”stateafter“OFF”)
72
[Fig.8-4]ScreenforDIerrordisplaymethodbyletter [Fig.8-5]ScreenforDIerrordisplaymethodbyphoto