Samwon Tech TEMI1000 Series - Time Signal Operation

61
3
3
2
1
07. Program setting
[Fig. 7-7] Time signal setting #1
7-4. Time signal operation
●ThetimesignaloperationisclassifiedintoON/OFFoperation,timesettingoperationandthesettimesignalisusedforsettingthetimesignalNo.
insegmentsettingin[7-1Programpatternsetting]
(1) Time signal ON/OFF operation
ThetimesignalisOFFduringcorrespondingsegmentoperation
when“0”isselected.
●
Thechangeisimpossibleasitisonlyforreading.
ThetimesignalisONduringcorrespondingsegmentoperation
when“1”isselected.
●
Thechangeisimpossibleasitisonlyforreading.
Movingthescreenup/downby6timesignalunits.
①
②
③