Samwon Tech TEMI1000 Series - Setting Button Operation

5
01. Operation and setting
1-2. Setting button operation
Button type Button operation
The“Setvalue”istouchedinstationaryoperation/stillscreenanditisusedforsettingthesetvaluewantedbytheuser.
The“PatternNo.”istouchedinprogramstillscreenanditisusedforsettingthepatternnumberwantedbytheuser.
Itisusedforinputtingthegeneralnumbersandname.
Itisusedforselectionforoneoutofmanytypes.
Itisusedforselectionforoneoutofmorethan2parametersetting.(ON/OFF/Inactivestate)
ItisusedforselectionofY/Nforthecorrespondingparameter.(ON/OFF/Inactivestate)
Itisusedforgeneralscreenconversion.
Itisusedforincreasingordecreasingofthepagewithinthesamescreen.
Itisusedforthepageconversionbythedecreaseandincreaseintimeaxisonthesamescreen.