Samwon Tech TEMI 300 User Manual

There are two kinds of commands, Self-information and Read/Write commands in the TEMI 300
Command
① Self-information command
② Read/Write Command
3.2 Communication Commands
Process
AMI Model name & Version
Command Process
RSD
RRD Reading D-Register Random
WSD Writing D-Register orderly
WRD Writing D-Register Random
STD Registration Random data of D-Register
CLD Call D-Register of STD
Reading D-Register orderly
Each command can read/write up to 32 D-Register and the all of the STD/CLD data
will be reset when the power off, so the data should be resisted again
3.3 Error Response
The message when the communication error with TEMI 300
Byte
Command
element
1 2 2 2 2 1 1
S
T
X
Address NG
Number of
word(2)
SUM
C
R
L
F
※ SUM is only using when the PROTOCOL is '1'

Samwon Tech TEMI 300 Specifications

General

Brand	Samwon Tech
Model	TEMI 300
Category	Controller
Language	English