Samwon Tech TEMI 300 - Page 25

ON/OFF  SET KEY
ON/OFF mode1 for temperature
HIGH.SP : Set low SP on ON/OFF
HIGH.DIFF : Deviation value for high zone
MIDDLE.SP : Set middle SP on ON/OFF
LOW.SP : Set low SP on ON/OFF
LOW.DIFF : Deviation value for low zone
4.4.3 ON/OFF
.
.
.
.
.
.
ON/OFF mode5 for temperature
HIGH.SP : Set low SP on ON/OFF
HIGH.DIFF : Deviation value for high zone
MIDDLE.SP : Set middle SP on ON/OFF
LOW.SP : Set low SP on ON/OFF
LOW.DIFF : Deviation value for low zone
ON/OFF mode for humidity
HIGH.SP : Set high SP on ON/OFF
LOW.DIFF : Deviation value for high zone
LOW.SP
MIDDLE.SP
HIGH.SP
HIGH.DIFF
LOW.DIFF
LOW SP
MIDDLE SP
HIGH SP
HIGH DIFFERENCE
LOW DIFFERENCE
T.EU(0.0∼100.0%)
H.EU(0.0∼100.0%)
RL≤LOW.SP
<MIDDLE.SP
<HIGH.SP≤RH
T.EU
H.EU
T.EU(0.0%)
H.EU(0.0%)
OAlways
T.EU
H.EU
T.EU(0.0%)
H.EU(0.0%)
OAlways
T.EU
H.EU
T.EU(0.0%)
H.EU(0.0%)
OAlways
T.EUS(0.0 ∼ 10.0%)
H.EUS(0.0 ∼ 10.0%)
T.EUS
H.EUS
T.EUS(0.0%)
H.EUS(0.0%)
OAlways
T.EUS(0.0 ∼ 10.0%)
H.EUS(0.0 ∼ 10.0%)
T.EUS
H.EUS
T.EUS(0.0%)
H.EUS(0.0%)
OAlways
HIGH.SP must be set before MIDDLE.SP or LOW.SP
?
NOTE
Symbol Parameter Display Unit Default EditRange