3
* How to mark and look for MENU
1. Press Call/Menu button. Only 3(three) items of MENU can be simultaneously marked.
2. Press Up/Down buttons until the cursor is located at the wanted position.
Press ENT button to select any function.
3. Perform the wanted change and selection.
4. Press ENT button to confirm the change. If pressing ESC button, the current setup will stay
unchanged.
5. Press ESC button to get out of the current MENU function.
* How to put in numbers and alphabets
1. Use Up/Down buttons to input numbers and alphabets and the changes will be made.
2. Press Down button to display numbers first and if pressing continuously, the display will go fast
to the wanted value.
3. Press Up button to display alphabets first, if pressing continuously, the display will go fast to the
wanted characters.
4. If there is any wrong input, press ENT button until ā<ā is shown and then press ENT button for
correction.
To Next Page
Loading...
