January 20, 2020
© S&C Electric Company 2017-2020, all rights reserved
Instruction Sheet 461-507
TripSaver
®
II Cutout-Mounted Recloser
Outdoor Distribution (15 kV and 25 kV)
Operation Manual
Enabling Pole-Top Communication
Via the Magnet Tool
Table of Contents
Section Page Section Page
Introduction
Qualified Persons .......................... 2
Read this Instruction Sheet ................... 2
Retain this Instruction Sheet. . . . . . . . . . . . . . . . . . . 2
Proper Application .......................... 2
Warranty .................................. 2
Safety Information
Understanding Safety-Alert Messages ........... 3
Following Safety Instructions .................. 3
Replacement Instructions and Labels .......... 3
Location of Safety Labels .................... 4
Safety Precautions ......................... 5
Shipping and Handling
Packing .................................. 6
Inspection ................................. 6
Handling .................................. 6
Returning ................................. 6
Operation
Overview ................................. 7
Applying the Magnet Using the Magnet Tool ...... 7
Removing the Magnet Using the Magnet Tool ... 10
Limitations During Communication Session ......11
To Next Page
General
