Basic Usage 10
aware that once you perform the reset, any adjustments you made during the last operation
will be lost. Your saved content (e.g. Music Files, Recordings) will not be deleted from the
device.
Connecting to your Computer: PC Users
To connect the Sansa player to your PC, follow these instructions:
1. Connect the larger end of the USB cable into an available USB port on the PC.
2. Connect the smaller end of the USB cable into the dock connector of the player.
3. The player will show “Connected” on its display screen. (Pictured below)
4. The player will appear in My Computer as Sansa Clip Zip.
Auto Detect or MTP mode
The ability to change between Auto Detect and MTP (Media Transfer Protocol) mode for the
Sansa Clip Zip MP3 player is found under device system settings when USB Mode is
highlighted. Auto Detect and MTP mode are used for Windows Media Player functionality. Be
sure that either Auto Detect or MTP mode is selected to connect to a Windows computer. MTP
mode on Windows is pictured below.
To Next Page
Loading...
Need help?
General
