Sansa® View Overview
10
6 Play/Pause Displays music or recording file playback status
7 Progress Bar Displays progress of the current track
8 Track Number Displays current track number and total number of tracks
9 Track Name Displays name of the song
10 Album Name Displays name of the album
Battery
The Sansa View player comes with an internal rechargeable battery. To use the player for
the very first time, remember to fully charge the battery. You can charge your Sansa player
through the USB port of your computer, a car adapter (not included) USB port, or AC
adapter (not included) USB port.
Battery Level Indicator
The battery level indicator is located at the bottom-right corner of the screen.
Battery Full Battery Low
Charging
To charge the battery, please follow these steps:
1. Connect the smaller end of the Sansa cable into an available USB port on the
computer.
2. Connect the larger end of the Sansa cable into the Sansa player.
3. The computer must be on for most USB ports to charge your battery. Your
Sansa will show connected and the yellow charging indicator will appear. The
battery level indicator will blink while charging. You will not be able to play
while connected to the computer USB.
4. To stop recharging, simply disconnect the cable.
The battery can also be charged using an AC adapter (not included) or a car adapter
(not included) and you will be able to play your device while charging with one of the
adapters.
NOTE: Some low-power USB ports may not be able to provide enough charge
power.
To Next Page
Loading...
Need help?
General
