3
Basic Usage
11
This chapter provides you the basic usage instructions
for your Sansa
®
View player.
Basic Usage
Power Button
The power button is used to turn on or off the player, as well as resetting it.
Power On
Slide the Power Switch up to turn on the player. The Blue Ring will light up and
the Main Menu will appear after it has been booted up.
Power Off
Slide the Power Switch up and hold it for about 2 seconds to turn off the player.
NOTE: To prevent accidental power on, move the HOLD switch to the locked
position.
Reset
To reset your player, slide the Power Button up and hold it for approximately 10
seconds. This is like a power down of the device. Once you perform the reset, the
adjustments you made during the last operation will be gone.
Submenu Button
When submenu is available, the submenu icon will display on the left bottom of the display
screen. Press the Submenu
button to enter submenu.
Thumbwheel
The thumbwheel can be used to adjust the volume control as well as setting the brightness
levels and changing the rating. Turn the wheel clockwise to scroll down through menu
items or to increase the volume during playback. Turn the wheel counterclockwise to
scroll up through menu items or decrease the volume during playback.
To Next Page
Loading...
Need help?
General
