Sandpiper SB1 User Manual

sb1dl5sm-rev0317
sandpi p erpump .com
11 • Model SB1 & SB25
1B
1A
1C
1F
1D
1E
1C
1F
1D
1E
1F
1A
1D
1C
1E
1D
1B
1D
1C
1E
IMPORTANT
Read these instructions completely, before installation
and start-up. It is the responsibility of the purchaser
to retain this manual for reference. Failure to comply
with the recommendations stated in this manual will
damage the pump, and void factory warranty.
Air Distribution Valve Assembly
With Aluminum Center
Main Air Valve Assembly Parts List
Item Item Number Description Qty
1 031.203.000 Assembly, Main Air Valve 1
1A 031.039.000 Sleeve & Spool Set 1
1B 095.113.157 Body, Valve 1
1C 132.037.357 Bumper 2
1D 165.129.157 Cap, End 2
1E 170.032.330 1/4-20 X 3/4 Capscrew 8
1F 560.058.360 7/8 ID X 1/16 CS O-Ring 8
Air Distribution Valve Servicing
See repair parts drawing, remove screws.
Step 1: Remove hex capscrews (1E).
Step 2: Remove end cap (1D).
Step 3: Remove spool part of (1A) (caution: do not scratch).
Step 4: Press sleeve (1A) from body (1B).
Step 5: Inspect bumpers (1C) and o-rings (1F).
Step 6: Lightly lubricate O-Rings (1F) on sleeve (1A).
Step 7: Press sleeve (1A) into body (1B).
Step 8: Reassemble in reverse order, starting with step 3.
Note: Sleeve and spool (1A) set is match ground to a specied clearance
sleeve and spools (1A) cannot be interchanged.
ATEX Compliant
LEGEND:
= Items contained within Air End Kits
MODEL SPECIFIC
4: AIR END

Sandpiper SB1 Specifications

General

Brand	Sandpiper
Model	SB1
Category	Water Pump
Language	English