Sandstrom S08DPF10 - Set Slideshow Effect; Set Slideshow Interval; Set Split Slideshow

GB-11
Settings Basic Operation
Preparations Introduction and
Product Overview
Troubleshooting
and Specication
Safety Warnings
Set Slideshow Eect
In the menu press the / button to select slideshow eect and then press the
/ button to select one of the 10 eects : Radom, Windows, Jalousie, Fade, Insert,
Reel, Brick, Release, 3DMix, Comb.
Set Slideshow Interval
In the menu press the / button to select slideshow interval and then press the
/ button to set a value from 3 seconds (default), 5 seconds, 15 seconds, 3 minutes,
5 mintues and 15 minutes for the interval between images. Set “o” on single or
calendar view mode if no need slideshow is required.
During slideshow, no matter what value (including “O”) you set, there is still no function
for .
Set Split Slideshow
In the menu press the / button to select split slideshow and then press the /
button to select On / O. Set “On” for slideshow of multiple images. Each screen for at
most 4 landscape displays or 2 portrait displays.