GB-13
Product Overview
and Getting Started
Basic OperationDAB OperationFM Operation iPod Operation /
AUX Operation
Maintenance, Hints and
Tips and Specification
Safety Warnings
Software Version
1. Press and hold the INFO button for 2 seconds and then release it to view the software
version of this unit.
2. The software version will automatically disappear after 5 seconds.
Auto Scan Modes
There are two types of scans, one is Quick scan and the other is Full scan.
• Quick scan:
Searches the stations between channels 10A and 12D.
To activate the quick scan press the SCAN button.
• Full scan:
Searches all DAB channels in the UK DAB Band III.
Press and hold the SCAN button for 2 seconds.
Secondary Services
You may see a “>” symbol after the name of the station, this indicates that there are
secondary services available to that station. These secondary services contain extra
services that are related to the primary station. e.g. a sports station may want to add extra
commentaries. The secondary services are inserted directly after the primary station in the
station list.
To select the secondary station, press the
button when the “>” appears in the LCD before
the station name. When the secondary service ends, the radio will automatically switch
back to the primary station.
Manual Tuning
As well as the auto tune function, you can manually tune the receiver. This can help you
when aligning your aerial or when adding stations that were missed while auto tuning.
1. Press and hold the ENTER button, the LCD display will now show Manual tune.
2. Press the
buttons to cycle through the DAB channels, which are numbered from
5A to 13F.
3. After your desired channel number is selected, press the ENTER button to enter the
current multiplex, the top line will now display the rst station in the multiplex.
4. Press the
buttons to see what stations are present in the found multiplex.
5. Once you have reached the last station in the found multiplex, it will revert back to the
rst station again. If you wish to exit the Manual Tuning mode, just press the ENTER
button.
To Next Page
Loading...
Need help?
General