GB-17
Product Overview
and Getting Started
Basic OperationDAB OperationFM Operation iPod Operation /
AUX Operation
Maintenance, Hints and
Tips and Specification
Safety Warnings
Software Version
1. Press and hold the INFO button for 2 seconds and then release it to view the software
version of this unit.
2. Press the INFO button again to display the Program Identication code (PI code).
3. The software version will automatically disappear after 5 seconds.
System Reset
There may be times when you need to reset your unit back to the factory settings. If you
experience reception problems you may want to reset and try again. If you move the unit
to another part of the country and pick up the local and national stations in that area, your
previously tuned channels may no longer be available.
To do the system reset, press and hold the MODE button. Then press the ENTER button to
start the system reset. The unit will then start the Quick Scan for DAB channels immediately.
After the system reset, all the tuned stations, DAB & FM preset stations and
alarm settings will be erased.
To Next Page
Loading...
Need help?
General