Individual Group Cleaning Mode
Accessing Programming Menu
• Press and hold Sanremo logo (continuous) button on group 1 (left most group) until ‘HEATING CUP’ is read on pressure display.
• If continuous button is released when display reads ‘DOSES SETTING SELECT DOSE IN 30 S’, DO NOT press group buttons or volumetric
programming will be overwritten. Please wait for volumetric programming to time out after 30 seconds (Doses setting message will
disappear from pressure display) and re-try holding the continuous button to enter programming menu.
Programming Menu Options
Barista lights (if equipped)
Group flush notification to
maintain optimal extraction
temperature
Date/time settings & auto
on/off settings
Deep clean all groups.
*NOTE* Once started, it
cannot be interrupted.
Long dose buttons to change category
Short dose buttons will light up when category is
selected. These are used to change category values.
Continuous (Sanremo logo) button to enter categories / store values
To Next Page
Loading...
