Need help?Do you have a question about the Sansui 990 and is the answer not in the manual?
General| Tuning Range | FM, MW |
|---|---|
| Input Sensitivity | 2.5mV (MM), 150mV (line) |
| Output | 150mV (line) |
| Power Output | 80 W per channel into 8Ω (stereo) |
| Total Harmonic Distortion | 0.1% |
| Speaker Load Impedance | 4Ω to 16Ω |
| Channel Separation | 50dB (line) |
Details power output, bandwidth, distortion, and input sensitivity for the audio section.
Covers tuning range, sensitivity, S/N ratio, selectivity, and image rejection for FM.
Details tuning range, sensitivity, selectivity, and image rejection for AM.
Adjustments for DC voltage and bias current on the driver circuit board.
Procedures for adjusting FM tuning, muting, and sweep width.
Steps for aligning IF coils and tracking for AM reception.
Adjustments for MPX circuit, separation, and distortion.
Common audio circuit problems, defective parts, and potential causes.
Common tuner circuit problems, defective parts, and potential causes.
To Next Page
