Need help?Do you have a question about the Sansui 2000X and is the answer not in the manual?
Step-by-step guide for aligning the FM tuner section of the amplifier.
Procedure for aligning the FM stereo multiplex decoding circuit.
Step-by-step guide for aligning the AM tuner section of the amplifier.
Parts list and PCB layout for the FM Intermediate Frequency stage.
Parts list and PCB layout for the driver amplifier stage.
General| Power Output | 39 watts per channel into 8Ω (stereo) |
|---|---|
| Total Harmonic Distortion | 0.8% |
| Speaker Load Impedance | 4Ω to 16Ω |
| Frequency Response | 20Hz to 20kHz |
| Tuning Range | FM |
| Input Sensitivity | 2.5mV (MM) |
| Channel Separation | 45dB (line) |
| Output | 150mV (line) |
| Semiconductors | transistors |
To Next Page
