Sanus F11C - Install Wall Plate with Lag Bolts

11
16
4. Install wall plate
15
using two lag bolts
16
. Tighten the lag bolts only until they are pulled firmly against the wall plate.
CAUTION: Improper use could reduce the holding power of the lag bolt. DO NOT over-tighten the lag bolts
16
.
NOTE: If needed, you can make small level adjustments to the wall plate by loosening the bottom lag bolt and shifting the wall plate until level.
Tighten the bottom lag bolt
16
when adjustments are complete.
15
4
16
15