Sanus SLT4 - Step 2 A: Wood Stud Installation; Locate and Verify Studs; Mark Stud Centers

9
Max. 5/8 in. (1.5 cm)
Min. 16 in. (40.6 cm)
Min. 3 ½ in. (8.9 cm)
Min. 1 ½ in. (3.8 cm)
CAUTION: Avoid potential personal
injury or property damage!
● Drywall covering the wall
must not exceed 5/8 in. (1.5 cm)
● Minimum wood stud size:
common 2 x 4 in. (5.1 x 10.2 cm)
nominal 1 ½ x 3 ½ in. (3.8 x 8.9 cm)
● Minimum horizontal space between
fasteners:16 in. (40.6 cm)
● Stud centers must be verified
STEP 2A Wood Stud Installation
Locate the studs using a stud finder. Find the edges of the studs using
an awl or small drill bit.
Mark the centers of the studs
with a pencil.
1
LOCATE
2
VERIFY
3
MARK