Sanwa MX-3X - Features and Specifications; System Features; System Specifications; Servo Recommendations

Page 5

3-Channel 2.4GHz Computer Radio with Advanced Programming for Competition Cars, Trucks, and Boats

Compatible with All Current SANWA 2.4GHz FHSS-3 and FHSS-2 Surface Receivers

High-Power FHSS-3 Technology Provides the Best Reception and Connectivity, Giving Racers Added Assurance

4 Cell Dry Cell Battery for Lighter Weight - Also Accepts Optional 6 Cell Rechargeable Ni-MH Battery, 2 Cell Li-Po, or 2 Cell Li-Fe
Transmitter
Model: MX-3X
Output Power: 100mW
Nominal Input Voltage: 4.8v ~ 7.2v
Power Supply: 4 Cell or 6 Cell
Weight: 540g(with Alkalines)
Weight: 576g (with 6 Cell Ni-MH)
Frequency: 2.4GHz FHSS-3
Receiver
Model: RX451
Frequency: 2.4GHz FHSS-3
Nominal Input Voltage: 4.8v ~ 6.0v
Weight: 9g
Dimensions: 36.5 x 24.0 x 15.0mm
Fail Safe Limit: 3.8v Default / 3.5v ~ 5.0v Adjustable
Torque: 5.8kg/cm @ 4.8v
6.4kg/cm @ 6.0v
Speed: 0.10 sec/60º @ 4.8v
0.08 sec/60º @ 6.0v
Dimensions: 40.4 x 21.1 x 26.4mm
Weight: 50gr
Torque: 3.0kg/cm @ 4.8v
3.8kg/cm @ 6.0v
Speed: 0.20 sec/60º @ 4.8v
0.16 sec/60º @ 6.0v
Dimensions: 39.1 x 20.0 x 36.0mm
Weight: 45gr
SDX-901 Digital High-Power Metal Gear Dual Ball Bearing Servo
Torque: 23.0kg/cm @ 4.8v
29.0kg/cm @ 6.0v
Speed: 0.19 sec/60º @ 4.8v
0.15 sec/60º @ 6.0v
Dimensions: 40.6 x 21.1 x 38.1mm
Weight: 66gr
SRM-102Z Standard Bushing Servo
Both analog and digital servos will work with your MX-3X 2.4GHz FHSS-3 radio control system. To get the most out of your
experience, we recommend the use of digital servos.
Torque: 8.9kg/cm @ 4.8v
10.9kg/cm @ 6.0v
Speed: 0.17 sec/60º @ 4.8v
0.13 sec/60º @ 6.0v
Dimensions: 39.0 x 20.0 x 37.4mm
Weight: 56gr
SDX-772 Digital High-Power Metal Gear Dual Ball Bearing Servo

Model Naming

Model Select

Model Clear

Servo Sub-Trim

Mode Type (FH2/FH3/FH3F/DS2)

Audible Key Tone

Low Voltage and Inactivity Alarms

Battery Type Selectable (4 Cell or 6 Cell)

Battery Voltage Monitor

18 Model Memory

Servo Reversing

Steering Dual Rate

End Point Adjustment

Exponential

Adjustable Servo Speed

Four Wheel Steering Mixing

Dual Throttle Mixing w/Dig & Burn

Brake Mixing with Brake Hold

Auxiliary Channel 3 ON-OFF

Step Auxiliary

Point Auxiliary

Auxiliary Mixing (ST>CH3, TH>CH3)

Programmable Fail Safe

Receiver Battery Voltage Fail Safe

Digital Trims

Programmable Trim Switch

Adjustable Throttle Trigger
We recommend using SANWA brand servos with your MX-3X 2.4GHz FHSS-3 radio control system. These are a few of our
most popular servos. See your local SANWA dealer for pricing, availability and more selection.
FEATURES AND SPECIFICATIONS
SYSTEM FEATURES
SYSTEM SPECIFICATIONS
SERVO RECOMMENDATIONS
SDX-801 Digital Metal Gear Low-Profile Dual Ball Bearing Servo