Sanyo C4272R - Wireless Remote Controller Setup

1
2
3
4
5
6
I-102
SM831148
1. Specifications
1-13 Using Wireless Remote Controller with Wall-mounted Indoor Unit
When the wireless remote controller is to be used, slide the switch on the indoor unit
control PCB.
If this setting is not made, an alarm will occur.(The operation lamp on the display blinks.)
This setting is not necessary if both the wired remote controller and wireless remote
controller are used.
KH3072R
KH3672R
KHH2672R
KH2672R
Setting at time of
factory shipment
Slide No. 3 on SW101
from ON OFF.