Sanyo CLT2054 - Sound and Channel Tuning Adjustments; Adjusting Sound Settings; Adjusting Channel Tuning

TV ADJUSTMENT AND SETUP (Continued)
ADJUSTING SOUND
Select desired sound setting: Audio, Bass, Treble or
Surround.
1
Press MENU key to display main menu.
2
Use the / keys to highlight Sound.
3
Press + key to access the sub-menu options.
4
Use the / keys to select Audio from the
Sound menu options. (Selected option will be
highlighted yellow.)
5
Use the – /+ keys to adjust settings: Stereo,
Mono, or SAP.
Notes: Stereo and SAP must be part of the
broadcast signal.
The TV will automatically reset to stereo
if unplugged or a power failure occurs.
6
To adjust the other sound features: Bass, Treble,
or Surround, simply follow steps 4~5 above.
ADJUSTING THE CHANNEL TUNING
RESETTING THE ANTENNA MODE
Use this feature to switch between off-air and cable
channels.
1
Press MENU key to display main menu.
2
Use the / keys to highlight Channel.
3
Press + key to access the sub-menu options.
4
Use the  / keys to select Antenna from the
Channel menu options.
5
Use the + keys to select VHF/UHF or Cable.
(Selected option will be highlighted yellow.)
12
Need help? Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032