Sanyo CLT2054 - Channel Scan Memory Management; Deleting Channels from Scan Memory; Adding Channels to Scan Memory

14
Need help? Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032
CHANNEL SCAN MEMORY
When Channel menu option is selected, the current
Channel number will appear in the on-screen menu
display. If this channel is included in the channel
scan memory database the word “Delete?” will
appear on the screen, if it is not in the channel
database list, the word “Add?” will display.
TO DELETE CHANNELS FROM THE
CHANNEL SCAN MEMORY
1
Press MENU key to display main menu.
2
Use the / keys to highlight Channel.
3
Press + key to access the sub-menu options.
4
Use the / keys to highlight Channel No.
5
Use the / or numerical 0~9 keys to select
desired channel.
For cable channels above 99, press and hold
the 1 key until C1– – appears. Then enter the
other two numbers.
6
Use the  / keys to choose Memory from the
Channel menu.
7
Press the + key to delete the channel. HINT:
“Delete?” will change to “Add?”.
8
To chose other channels to delete, simply follow
steps 5~6 above, or press MENU key to return
to the Main menu.

Channels deleted from scan memory can be selected with
the number keys.

Restoring deleted channels, use the on-screen menu to
manually add channels or start CH. Search from the menu.
It may take a few minutes to search through the available
channels, or press the RESET key.
TO ADD CHANNELS TO THE CHANNEL
SCAN MEMORY
5
Use the numerical 0~9 keys to select desired
channel.
For
cable channels above 99, press and hold
the 1 key until C1– – appears. Then enter the
other two numbers.
6
Use the  / keys to choose Memory from the
Channel menu.
7
Press the + key to add channel. HINT: “Add?”
will change to “Delete?”.
8
To chose other channels to add, simply follow
steps 5~6 above, or press MENU key to return
to the main menu.
TV ADJUSTMENT AND SETUP (Continued)