To Next PageTo Next Page
Need help?Do you have a question about the Sanyo DC-088C and is the answer not in the manual?
General| Brand | Sanyo |
|---|---|
| Model | DC-088C |
| Category | Stereo System |
| Total harmonic distortion | 0.8% |
| CD Player | Yes |
| Cassette Deck | Yes |
| Tuner | Yes |
| Tuning range | FM, MW |
| Frequency response | 40 - 20000 Hz |
| Signal to noise ratio | 70 dB (line) |
| Speakers | 2-way speakers |
Details specifications for the Tuner/Amplifier and Speaker System units.
Details specifications for MD, CD, and Tape Deck units.
Details the various combinations of Tuner/Amplifier, CD changer, Tape deck, MD deck, and Speaker systems.
Illustrates flat connection leads for DC-X8CT and DC-X8CM systems.
Illustrates system connections for DC-088C/XE, including tape and MD decks.
Illustrates system connections for DC-088C/SP, including tape deck.
Details indoor aerial setup and proper speaker wiring polarity.
Details procedures for tuning adjustments using a plastic screwdriver and test signals.
Highlights critical safety instructions for servicing components identified with the IEC symbol.
Lists parts related to packaging and included accessories.
Lists components for the main unit's cabinet and chassis assembly.
Lists screws, brackets, and electronic components like transistors and diodes.
Details the pin functions and block diagram of the microcomputer IC.
Details the pin functions and block diagram of the servo signal processor IC.
Details the pin functions and block diagram of the digital signal processor IC.
Details ICs for Dolby noise reduction, head switching, and operational amplifiers.
Shows the mapping of display segments (S1-S18) to grid lines (G1-G12).
Provides a consolidated view of pin assignments for display control.
Step-by-step guide for cleaning the CD player's optical lens using alcohol and a cotton swab.
Instructions for confirming tracking balance and checking the 'eye' pattern for CD player performance.
Covers azimuth, tape speed, and torque adjustments for optimal tape deck performance.
Step-by-step guide for removing, installing, and lubricating the MD door mechanism.
Shows the mapping of display segments (S1-S18) to grid lines (G1-G12).
Provides a consolidated view of pin assignments for display control.
